Micellar Liquid Chromatography Study of Quantitative Retention–Activity Relationships for Antihypertensive Drugs

Use of micellar mobile phases in reversed-phase liquid chromatography (RPLC) results in hydrophobic and electrostatic sites for interaction. Modified stationary phases in micellar liquid chromatography (MLC) are structurally similar to biomembranes. To confirm this we focused on the effects of the type and concentration of surfactant (Brij 35, SDS, and CTAB) and mobile phase pH on the retention of antihypertensive drugs on modified C₁₈ stationary phases. Quantitative retention-activity relationships are proposed for the drugs and the different surfactants and compared with those obtained using aqueous–organic mobile phases. Finally, a correlation was obtained between the logarithm of retention factors (log k) and the toxicity (LD₅₀) of antihypertensive drugs. Revised: 14 September 2005 and 4 April 2006     

An improved method for determination of light hydrocarbons in stabilized crude oil

Summary This paper reports a quick, and simple method for quantitative determination of C₂ to C₆ hydrocarbons in stabilized crude oil without using a back flush system. A mixture of crude oil and internal standard is injected into a GC equipped with a 6 meter length of fused silica capillary as a guard column. The light hydrocarbons are separated individually up to the last peak of the hexane group with the heavier components trapped in the guard column. The total analysis time for each sample is 15 minutes. The base line is table for up to 15 consecutive analyses. The guard column and the injector port are then reconditioned by simply heating them for one hour at 300 °C.     

Magnetic microcapsules for targeted delivery of anticancer drugs

To achieve targeted distribution of anticancer drugs with sustained activity, ferromagnetic ethylcellulose microcapsules containing an anticancer drug, mitomycin C (FM-MMC-mc), were prepared by a method based on phase separation principles. Two prototypes of FM-MMC-mc were made: one with the drug as the core and zinc ferrite on its capsular surface (outer type); the other with both the drug and zinc ferrite as the core (inner type). Both preparations provided a sustained-release property and a sensitive response to conventional magnetic force, although certain differences in the release rate of drug, magnetic responsiveness, and particle size were found between the two dosage forms. Animal studies showed that the magnetic microcapsules could be magnetically controlled in the artery and urinary bladder. VX2 tumors in the rabbit hind limb and urinary bladder were successfully treated with magnetic control of FM-MMC-mc. Pharmacokinetic study revealed that the targeting of the microcapsules markedly enhanced the drug absorption into the surrounding tissues for a prolonged period of time. The results indicate the feasibility and effectiveness of the magnetic microcapsules as a targeted drug delivery system.     

Cationic vesicles as chiral selector for enantioseparations of nonsteroidal antiinflammatory drugs by micellar electrokinetic chromatography

A vesicle-forming chiral cationic surfactant (1R,2S)-(-)-N-dodecyl-N-methyl-ephedrinium bromide was evaluated as a pseudo-stationary phase in micellar electrokinetic chromatography (MEKC) for enantioseparation of eight non-steroidal anti-inflammatory drugs e.g., carprofen, flurbiprofen, fenoprofen, ibuprofen, indoprofen, ketoprofen, naproxen and suprofen by capillary electrophoresis. The effects of varying experimental conditions such as pH and concentration of surfactant in the running buffer on the enantiomer separation of the drugs are reported. A mixture of five of the above drugs was separated and each enantiomeric pair was also separated simultaneously in a single run by use of the surfactant. The strong electrostatic interactions between the analytes and the vesicles seemed to have a major role in the enantiomeric separation of the profens.     

Speciation analysis of platinum antitumoral drugs in impacted tissues

Chemical compounds containing platinum have been employed since 1978 as drugs to beat certain type of tumours. Nevertheless, besides of their exceptional antitumoral properties, these drugs also have important deleterious side effects, such as, nephrotoxicity and ototoxicity.A study of Pt accumulation and a speciation analysis has been performed by ICP-MS in samples from kidney and inner ear in a controlled population of Wistar rats treated with, either, cisplatin, carboplatin or oxaliplatin. The results on Pt accumulation point out to drug structure and not only to Pt content as the responsible for the alteration of organ functionality.Speciation studies in the samples from kidney and inner ear were performed coupling two-dimensional liquid chromatography (2D-LC) to ICP-MS. Size exclusion (SEC) and anion exchange fast protein liquid chromatography (FPLC) was employed for 2D orthogonal separation. After these separations, free drug peaks were not observed in any of the samples.The binding of Pt to biomolecules was demonstrated by SEC and, independently of the drug used, Pt eluted as two main bands with molecular weights of 12 kDa and 25-65 kDa for inner ear samples, and as two different bands with 20 kDa and 50-60 kDa in the samples from kidney. However, the relative band intensity presented important differences for the three drugs. Using the same chromatographic conditions, it was shown that a metallothionein (MT) standard eluted in the same position as some of the cytosolic Pt-biomolecules.High Pt-containing fractions eluting from the SEC column were analysed by anion exchange FPLC after a preconcentration step. Among the different preconcentration methods tested, sample focusing on the head of the FPLC column shows main advantages. In this way, the separation by 2D chromatography of the high molecular Pt-species has been considerably improved.     

Pyrolysis Analysis and Kinetics of Crude Oils

This research presents the results of an experimental study on the determination of pyrolysis behaviour and kinetics of six crude oils by differential scanning calorimetry (DSC) and thermogravimetry (TG/DTG). Crude oil pyrolysis indicated two main temperature ranges where loss of mass was observed. The first region between ambient to 400°C was distillation. The second region between 400 and 600°C was visbreaking and thermal cracking. Arrhenius-type kinetic model is used to determine the kinetic parameters of crude oils studied. It was observed that as crude oils gets heavier (°API decreases) cracking activation energy increases. Activation energy of cracking also show a general trend with asphaltene content. This revised version was published online in July 2006 with corrections to the Cover Date.     

Adventages and limits on usage of thermal methods in complex systems

In order to increase the nutrition value of bread, one of the most commonly used foodstuff all over the world, different additives are used in bread processing. In this paper we describe the thermal changes in bread and that of with 0.5% crude soybean lecithin additive. Their thermal stability has been investigated by TG, DSC and EGD methods. The thermal changes were also followed of soy products, lecithin and lysine, ingredients used as bread additives in order to check if they may suffer any thermal degradation during the baking process. The data obtained can be of use only for qualitative conclusions. According to the obtained data at the usual bread baking temperature only the additives in crust may partly decompose while in the crumb, at lower temperatures the additives, due to baking, are not damaged. The thermal methods give a possibility for rapid estimation of processes induced by heat effects in additives during the baking, and they are suitable to detect the changes during the bread-making procedure. However, they are neither suitable to provide any quantitative data on these changes nor facts affecting the nutrition value and of the bread.     

Agaricus bisporus Crude Extract: Characterization and Analytical Application

In the present work crude Agaricus bisporus extract (ABE) has been prepared and characterized by its tyrosinase activity, protein composition and substrate specificity. The presence of mushroom tyrosinase (PPO3) in ABE has been confirmed using two-dimensional electrophoresis, followed by MALDI TOF/TOF MS-based analysis. GH27 alpha-glucosidases, GH47 alpha-mannosidases, GH20 hexosaminidases, and alkaline phosphatases have been also detected in ABE. ABE substrate specificity has been studied using 19 phenolic compounds: polyphenols (catechol, gallic, caffeic, chlorogenic, and ferulic acids, quercetin, rutin, dihydroquercetin, l-dihydroxyphenylalanine, resorcinol, propyl gallate) and monophenols (l-tyrosine, phenol, p-nitrophenol, o-nitrophenol, guaiacol, o-cresol, m-cresol, p-cresol). The comparison of ABE substrate specificity and affinity to the corresponding parameters of purified A. bisporus tyrosinase has revealed no major differences. The conditions for spectrophotometric determination have been chosen and the analytical procedures for determination of 1.4 × 10⁻⁴–1.0 × 10⁻³ M l-tyrosine, 3.1 × 10⁻⁶–1.0 × 10⁻⁴ M phenol, 5.4 × 10⁻⁵–1.0 × 10⁻³ M catechol, 8.5 × 10⁻⁵–1.0 × 10⁻³ M caffeic acid, 1.5 × 10⁻⁴–7.5 × 10⁻⁴ M chlorogenic acid, 6.8 × 10⁻⁵–1.0 × 10⁻³ M l-DOPA have been proposed. The procedures have been applied for the determination of l-tyrosine in food supplements, l-DOPA in synthetic serum, and phenol in waste water from the food manufacturing plant. Thus, we have demonstrated the possibility of using ABE as a substitute for tyrosinase in such analytical applications, as food supplements, medical and environmental analysis.     

Sequential injection spectrophotometric determination of phenylephrine hydrochloride in pharmaceutical preparations

A fully automated sequential injection spectrophotometric method for the determination of phenylephrine hydrochloride in pharmaceutical preparations is reported. The method is based on the condensation reaction of the analyte with 4-aminoantipyrine in the presence of potassium ferricyanide. The absorbance of the condensation product was monitored at 503 nm. A linear relationship between the relative peak height and concentration was obtained in the range 0.5-17.5 mg l⁻¹. The detection limit (as 3σ value) was 0.09 mg l⁻¹ and repeatability was 0.8 and 0.6% at 2.5 and 5 mg l⁻¹, respectively. Results obtained by this method agreed very well with those obtained by the AOAC official method.